Torque: a twisting force that tends to cause rotation. Torque is the amount of energy it takes to spin the nut up along the threads of a bolt. Tension is the stretch or elongation in a bolt that provides the clamping force in a joint.
What happens when you over torque? The process of over torquing is one in which you are tightening a nut or bolt head, and stretching the bolt. You will notice the threads on the bottom bolt appear narrower than the bolt on the top. This bolt has stretched and essentially become weaker. It also makes a worse connection than a properly torqued bolt. While the bolt may feel tight, it is actually a looser connection.
The use of power tools is prohibited in ALL of our installations due to the damage it causes the hardware as well as the boards.
The average power tool is automatically set to torque 800-900ft.lbs.
Our boards are only rated to yield 18ft.lbs, which is 5X less than any power tool is torquing at.
This is an example of what happens when someone uses the wrong tools.
Recommended tool to use:
- Torque wrench (this tool allows you to set it to the correct torqueing ft. lbs. rated for our products)
Don’t forget to check out our video showing how to properly torque the bolts.
Coming next month on Romik.com, The 2017-2018 jeep compasses are here and ready to go. Jeep Compass Running boards will give you a boost into the cab and boost your 2018 Jeep Compass's appearance. These are an easy to install product, running boards that can be installed right in your driveway at home. If you don’t feel comfortable feel free to take them to a mechanic.
With the new redesign of the jeep compass our running boards really compliment the look of the vehicle.
With summer here make sure you drive your jeep in style with running boards from www.romik.com. Check out all the different styles Romik has to offer for this vehicle.