Swipe to the left

November 2018

Santa came early this year with the 2019 Hyundai Santa Fe!

By Mark Taylor 11 months ago 342 Views No comments

The 2019 Hyundai Santa Fe returns with completely redesigned Sheet metal and a full range of active safety tech to keep you and your family out of trouble. Refinement has been prioritized for the latest generation of this midsize crossover, and the Santa Fe feels polished.

Hyundai Santa Fe Running Boards are the allow you to upgrade your vehicle’s function and fashion in one easy Step Romik running boards are made from aircraft quality triple wall aluminum extrusion that are twice as thick as our competitors and are complemented by black end caps with grip assurance technology. Hyundai Santa Fe running boards make getting in and out of your vehicle an easy task. When you're trying to get kids, cargo and pets into your vehicle you need to minimize problems that slow you down. With the secure stepping power of running boards for your Hyundai Santa Fe, you can load it all in quickly and conveniently.

The Romik compliments the lines of your Hyundai Santa Fe and gives the occupants sure footing. Sold in pairs, the Romik Running Boards include vehicle specific mounting brackets and hardware. Romik running boards are backed by a limited lifetime warranty. Buy Hyundai Santa Fe running boards with confidence.

Make sure to check out Romik running boards today!


Winter is coming!!!

By Mark Taylor 11 months ago 368 Views No comments

How to Maintain your Romik Products.

*Romik recommends that a quality Carnauba Wax is used to protect your finish. *

STEP 1: Loosen any dirt by hosing off any accumulated dirt, a strong stream of water will normally suffice

STEP 2: Fill a bucket with water and add a good quality car wash soap (Do not use dish washing soap)

STEP 3: Use a clean sponge and lather up your running boards, working from front to back. Rinse the sponge if you see dirt starting to accumulate.

STEP 4: Rinse the running boards with a strong stream of water

STEP 5: Dry your Romik running boards with a terry cloth or towel (Do not use paper towels as it may scratch the surface)

STEP 6: Using a wax applicator apply a coat of wax to the surface of the Romik running board. If your product is the RB2-S or the RZR coat the stainless-steel surface as well. NOTE stainless steel will not rust however it is a hand polished Surface and you must maintain it.

STEP 7: Using a clean terry cloth wipe away the carnauba wax, turn the cloth several times so wax will not accumulate and Leave streaks on the surface. If the running boards have dirt stuck to them repeat all steps DO NOT use a harsh Chemical to remove any of the dirt.

STEP 8: Inspect your Romk running boards for any damage and protect as needed with a clear coat finisher. This will prevent further damage.

WARNING: In extreme climates many municipalities use harsh chemicals to de-ice the roads. It is recommended that you clean and protect your Romik running boards before winter. Protecting your Romik running boards is simple, follow these procedures and they will continue to look as good as the day you install them. This tutorial applies to all Romik running boards.

NOTE: Romik products are made from the highest quality materials in the industry, however as with any accessory regular maintenance is required. Romik recommends that you follow these steps a minimum of 2 times per year depending on weather conditions. If you live in an area that has in climate weather conditions, we recommend that you do this more often.

Please see instructional video on how to remove stains from your Romik running boards. CLICK HERE