How to Maintain your Romik Products.
*Romik recommends that a quality Carnauba Wax is used to protect your finish. *
STEP 1: Loosen any dirt by hosing off any accumulated dirt, a strong stream of water will normally suffice
STEP 2: Fill a bucket with water and add a good quality car wash soap (Do not use dish washing soap)
STEP 3: Use a clean sponge and lather up your running boards, working from front to back. Rinse the sponge if you see dirt starting to accumulate.
STEP 4: Rinse the running boards with a strong stream of water
STEP 5: Dry your Romik running boards with a terry cloth or towel (Do not use paper towels as it may scratch the surface)
STEP 6: Using a wax applicator apply a coat of wax to the surface of the Romik running board. If your product is the RB2-S or the RZR coat the stainless-steel surface as well. NOTE stainless steel will not rust however it is a hand polished Surface and you must maintain it.
STEP 7: Using a clean terry cloth wipe away the carnauba wax, turn the






